Sooner or later in the life of every owner there is an urgent need to connect a hose to a tap with water. However, here's the bad luck, not every hose wants to be pulled on the plumbing element so easily and simply. In this case, you will have to invent some trick to fix it. One such, and very effective, is just in mind.
What you need: balloon, tape, hose
So, everything is simple enough! We take scissors and balls, after which we cut off 1/3 of the product from the top side. Next, we take the hose, remove the fitting (if any) from it and pull the prepared ball onto the released element. Actually, the structure for fixing the hose is actually ready. Now it remains only to "fix" it on the crane. This will require some manual dexterity.
We attach our hose to the tap from which we want to receive water, after which we begin to pull the trimmed ball onto the tap. You need to do everything in the way shown in the picture. When the connection of the vessels is completed, we take the scotch tape in our hands and wrap it first with part of the ball lying on the tap, and then part of the ball on the hose.
Thus, it will be possible to create a sufficiently reliable and rigid structure. The hose can be used more or less freely without fear that it will disconnect from the tap at the most inopportune moment. The entire system is disassembled in reverse order. The only drawback is that after some types of adhesive tape, the faucet (may) have to be washed from the glue.
Video:
Continuing the topic, read about 9 secrets to bathroom beautificationthat plumbers prefer to keep silent about.