How to remove a dent on the bumper with your own hands, without resorting to the services of a service station

How to remove a dent on the bumper with your own hands, without resorting to the services of a service station
How to remove a dent on the bumper with your own hands, without resorting to the services of a service station
Anonim
Such dents on the bumper are easy to remove with your own hands
Such dents on the bumper are easy to remove with your own hands

Many drivers have found themselves in a situation where there are no casualties in a collision of cars and they manage to get off with only one bumper. Meanwhile, the repair of this part is not a cheap job, and sometimes you even have to purchase a new body kit element. But the bumper can be repaired, and it is not at all difficult. Moreover, even large dents can be removed in just 5 minutes, and for this you need what is in every home.

Light collision with minimal damage
Light collision with minimal damage

Traffic accidents do not always end with smothered cars and fatalities. Usually the situation is just the opposite, and most often the body parts of the car or only the bumper suffer. After a strong collision, the bumper shatters into pieces and is practically impossible to restore. But the plastic part can withstand a weak blow, after which only a dent remains. It is not always possible to correct it, and here a simple tool that every person has in the kitchen will come to the rescue.

First, we thoroughly clean the bumper so that during further repairs, the debris does not eat into the material
First, we thoroughly clean the bumper so that during further repairs, the debris does not eat into the material

In order not to resort to the services of repairmen at the service station and to save money, we will make the repair ourselves. First, let's clean the damaged surface. In the event of a collision, paint particles from another vehicle may be transferred to the surface of the bumper. It can be removed using chemistry. First is nail polish removerthat every woman has. It should be used very quickly, since the substance quickly eats away not only dirt, but can also ruin the native paintwork. The same goes for brake fluidthat also wipes away dirt and paint from impact.

But the application of the liquid WD-40 less effective, but much safer, since the vedeha does not eat paint as aggressively.

Pour boiling water over the "injured" place
Pour boiling water over the "injured" place

Next, we proceed directly to removing the dent. To do this, you will need two containers: with boiling water and with cold water. Since the bumper is made of plastic, it softens when exposed to boiling water. If you spill a part with hot water, there is a chance that the bumper itself will return to its normal shape. If this does not happen, you need to "help" him by putting his hand under the bumper and "pushing" the dent from the inside of the car.

When the impact site is straightened, you need to water it with cold water. Then the plastic will cool down and take the shape we need. If this is not done, the dent may "come back" during natural cooling.

You can also use hair dryer, with the help of which the damaged area is heated. Here are just a household power tool will have to "play" much longer than using boiling water.

Drivers should also know how to remove a crack on a car windshield on your own, and cool to tune the car with your own hands.

Popular by topic