A penny method that will allow you to clean the toilet from limestone deposits

Table of contents:

A penny method that will allow you to clean the toilet from limestone deposits
A penny method that will allow you to clean the toilet from limestone deposits
Anonim
Image
Image

Limestone deposits inevitably appear on any plumbing. The toilet in this respect is not only no exception, but, on the contrary, is the best confirmation of the rule. Working with a toilet is always not very pleasant and almost always difficult. Therefore, every owner and hostess is interested here in making a minimum of effort and getting the maximum effect. One "grandmother's" method will help in this.

What you need: plastic bottle, hydrogen peroxide, ammonia, mixing container 3 liters, brush, brush

Stage one: water removal

The bottle comes into play
The bottle comes into play

The first step is to remove excess water from the toilet. An ordinary plastic bottle will help us in this matter. We use it according to the enema principle. The process, frankly speaking, is not fast, but it must be done. As soon as a significant part of the water is pumped out, you can safely proceed to the next step.

Stage two: preparation of the cleaning composition

We mix the composition
We mix the composition

Pour 2 liters of clean water into the mixing container. We add 100 ml of hydrogen peroxide and 50 ml of ammonia to it. Both can be easily purchased for mere pennies at the nearest pharmacy. Stir the future cleaning composition thoroughly. It is important to remember that ammonia in ammonia is an irritant. Therefore, it is necessary to use hand protection and keep small children away from the container. As soon as the solution is ready, we move on to the most critical part.

Stage three: cleaning the toilet

Pour out and three with a brush
Pour out and three with a brush

We go to the toilet and pour the prepared solution into the toilet. We arm ourselves with a brush and carefully rub the solution poured into the sink over its entire surface. We leave the toilet in this position for 2-3 hours. To prevent the smell of ammonia from spreading so much throughout the apartment, it is recommended to close the lid.

As soon as the deadline has passed, we return to the toilet and clean it with a brush. We wash off the water 3-5 times. After such, no limestone deposits should remain on its walls.

We wait for time and wash off
We wait for time and wash off

Important: this method cannot be used if an individual biological water purification station is used in the house. It can be used only in residential premises with a common sewage system.

Continuing the topic, read about how to clean a shower headto forget about the problem of water stone for a long time.

Popular by topic